FIU-932: REAR PANEL CONNECTIONS

rp1.png

P1: DC POWER INPUT

This input should only be used with the power supply provided: PS-932-6V-INT.
The 6V regulated power supply for FIU-932 is CE marked and includes four plugs for US/ Japan, EU, UK and Australia.

P2: AUXILLARY FUNCTIONS - SERIAL AND TTL OUTPUTS

This port contains the TTL and serial output signals.

  • For the serial output, use cable CB-932-SER-1.
  • For use with a parallel port, use cable CB-932-PAR-1.
    It is 36 pin MDR type connector. An example mating connector is made by 3M and listed as model number 3M 10136-3000PE.

P3: USB OUTPUTS

For most users this is the main data output port.

It is connected to the host computer using a commonly available USB cable (5 pin mini-USB to USB).

P4: OPTICAL TRIGGER INPUT

This port accepts optical trigger signals such as those produced on some Siemens MR scanners. It uses an Agilent HFBR connector.
Use with cable HFBR-RNS010Z.

P5: OPTICAL PORT

This port connects to a Current Designs removable fiber optic bundle or directly to an optical handheld device.

It has 12 optical pins: 4 transmitting and 8 receiving.

P6: TTL TRIGGER INPUT

This connector accepts TTL trigger signals. Triggers are detected on low-to-high (positive-going) edges; there is no minimum pulse width.
Use with cable CB-SMB-BNC-1.
Topic revision: r1 - 12 Sep 2019, BenDugan
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback