Opening the 932 interface enclosure

Please follow these instructions if you need to open the 932 interface enclosure.

Reassembly is obvious once you've opened the case: just reverse the steps.

CAUTION: DO NOT REMOVE SCREWS OTHER THAN THE ONES SHOWN BEING REMOVED HERE.

1. Remove the knob from the shaft encoder

Use a 1/16" inch allen key.

opening_case_1.JPG

2. Remove the two outermost screws from the rear panel

Use a phillips screwdriver.

opening_case_2a.JPG

opening_case_2b.JPG

3. Slide the board out

opening_case_3.JPG

Once the board is out: Be careful not to handle the optical fibers which can be easily damaged.
Topic attachments
I Attachment Action Size Date Who Comment
opening_case_1.JPGJPG opening_case_1.JPG manage 33 K 15 Apr 2020 - 14:44 BenDugan  
opening_case_2a.JPGJPG opening_case_2a.JPG manage 32 K 15 Apr 2020 - 14:44 BenDugan  
opening_case_2b.JPGJPG opening_case_2b.JPG manage 33 K 15 Apr 2020 - 14:45 BenDugan  
opening_case_3.JPGJPG opening_case_3.JPG manage 44 K 15 Apr 2020 - 14:45 BenDugan  
Topic revision: r1 - 15 Apr 2020, BenDugan
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback