GETTING STARTED: The 904: Compact fORP Package

The new 904 fORP system is a low cost, high feature package for subject response in fMRI. It's really easy to use. Simply attach the handheld to the interface (with or without the removable bundle), attach the USB cable and you're ready to go. There are two trigger inputs (optical and TTL) for syncing your data with the scanner.

System

  • Interface
  • 8-fiber removable bundle
  • 4-button response pad
  • USB cable.

Front Panel

The USB connection is made to the small USB connector on the front panel, shown here on the right (as P1).

The front panel also has 5 LED indicators, for trigger and button status.

fp1.png

Rear Panel

The optical connections are made to the rear panel. You can connect most optical handheld devices directly to the optical port (P4), or through long removable bundle to that port.

The 904 will also accept TTL and optical trigger inputs on ports P3 and P2, shown here.

rp1.png

The TTL input is positive edge-triggered and has a weak internal pullup resistor (47 k ohm). There is no minimum pulse width for the TTL input.

Set Up

  1. Attach the handheld to the interface with or without the removable fiber optic bundle to P4.
  2. Attach the USB cable from P1 to a computer.
  3. Optional: connect trigger-in cable to the TTL SMB (P3) or Main.Optical HFBR connector (P2).

The interface is powered by the USB port and automatically adjusts the light levels for use with or without the bundle.

User Tips

  1. Attach the handheld before attaching to the computer.
  2. If it's not working properly, detach and reattach the USB.
  3. Make sure the connectors are fully attached.
  4. Each time the USB is attached the interface is powered up and it sets its optical gain based on what is connected. If you add the removable bundle, you will need to reset the gain by reattaching the USB.

Standard Output

If you are using the 904 with a button box, and have not requested special outputs, this is what will be sent over the USB connection:

Button Keycode
Blue 1
Yellow 2
Green 3
Red 4
TTL trigger 5
Optical Trigger 6

Support

If you have any questions or suggestions, please contact us here:

webbrochurelogo.png \ www.curdes.com
\
Current Designs, Inc.
3950 Haverford Ave.
Philadelphia PA 19104 \
Phone: 215 387-5456
Fax: 215 386-4857
Main.Email: support@curdes.com

Topic attachments
I Attachment Action Size DateSorted ascending Who Comment
fp1.svgsvg fp1.svg manage 20 K 11 Sep 2019 - 21:22 BenDugan  
fp1.pngpng fp1.png manage 24 K 11 Sep 2019 - 21:24 BenDugan  
rp1.pngpng rp1.png manage 57 K 11 Sep 2019 - 21:25 BenDugan  
webbrochurelogo.pngpng webbrochurelogo.png manage 3 K 23 Feb 2021 - 20:01 BenDugan  
This topic: CdiDocs > WebHome > 904GettingStarted
Topic revision: 23 Feb 2021, BenDugan
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback